How to change table top stand height and position after set up

IMPORTANT: This article applies only to specific products and/or operating systems. Check Applicable Products and Categories for details.

Before you start

• To see what TV stand options are available for the A8/A8x, XH95 and XH90/92 series, visit the article: Can I adjust the stand of my Sony Android TV?
• The steps in the guide below require three people or more.
• Make sure an adequate number of people is used to safely support the TV.
• When you lift one side of your TV, make sure the opposite side doesn't drop to the floor.

A8, XH95 (55, 65, 75), XH90 - XH91 - XH92 series TV

1. Remove the stand from the TV.

   

2. Support the bottom of your TV with a suitable material such as a stack of newspapers or magazines. The illustration shows the approximate size (width, height, and depth) of the recommended support material.

   

   TV Series	Units are in inches
   	[A] Width	[B] Height	[C] Depth
   A8H	16-24	Approx. 8	8 or more
   XH950 (55, 65, 75)	16-24	Approx. 10	8 or more

   
    
3. Reattach the stand to your TV in the new position.
    
   • A8 series

     

   • XH95 series (55, 65, 75) XH90 - XH91 - XH92

     

ZH8 series TV

1. Remove the stand from the TV.

   

2. Support the bottom of your TV with a suitable material such as a stack of newspapers or magazines. The illustration shows the approximate size (width, height, and depth) of the recommended support material.

   

   TV Series	Units are in inches
   	[A] Width	[B] Height	[C] Depth
   Z8H	16-24	Approx. 1	8 or more

1. Reattach the stand to your TV in the new position.
   • The image below is an example. For more information, refer to the Setup Guide included with your TV.